The effect of al particle size on thermal decomposition,mechanical strength and sensitivity of Al/ZrH2/PTFE composite

To study the thermal decomposition of Al/ZrH2/PTFE with different Al particle size as well as mechanical strength and impact sensitivity under medium and low strain rates, molding-vacuum sintering was adopted to prepare four groups of power materials and cylindrical specimens with different Al particle size. The active decomposition temperature of ZrH2 was obtained by TG-DSC, and the quasi-static me-chanics/reaction characteristics as well as the impact sensitivity of the specimen were studied respec-tively by quasi-static compression and drop-hammer test. The results show that the yield strength of the material decreased with the increase of the Al particle size, while the compressive strength, failure strain and toughness increased first and then decreased, which reached the maximum values of 116.61 MPa, 191％, and 119.9 MJ/m respectively when the Al particle size is 12—14μm because of particle size grading. The specimens with the highest strength and toughness formed circumferential open cracks and reacted partly when pressed. Those with developmental cracks formed inside did not react. It is considered that fracture of specimens first triggered initial reaction between Al and PTFE to release an amount of heat. Then ZrH2 was activated and decomposed, and participated in subsequent reaction to generate ZrC. The impact sensitivity of the specimens decreased with the increase of Al particle size.     

螺旋齿轮齿面接触应力理论计算

应用赫兹理论和齿轮啮合理论给出了螺旋齿轮齿面接触应力的计算方法和相关公式 .算例的计算结果表明螺旋齿轮齿面接触应力明显大于相近参数的圆柱斜齿轮 ,这是此类齿轮用于主传动时普遍出现齿面磨损的一个重要原因 ,因此在设计确定齿轮参数时必须校核接触应力 .     

超声波法检测火灾高温后钢筋混凝土强度

我国每年有大量钢筋混凝土结构的建筑过火,科学准确的评估火灾高温后构件和结构的残存强度,据此制定科学合理的修复加固方案对于减少火灾损失具有重要意义。简略介绍了国内外火灾高温后钢筋混凝土结构受损评估的方法,并以某工程火灾后的强度检测为实例,提出了用超声波法检测火灾高温后钢筋混凝土残存强度的可行性和检测时应注意的问题,根据对多起建筑火灾高温后钢筋混凝土构件检测波形的对比,提出了不同受损程度的钢筋混凝土构件所表现的不同特征的波形。     

Development of proxy relationships: a case study of the Lebanese Civil War

Proxy warfare is a consistent element in international warfare. However, it is unclear why proxy relationships form in cases where states have multiple options of groups to support. Existing research identifies the presence of transnational constituencies, shared interstate rivalries, and moderate relative strength of militant groups as highly influential on the development of a proxy relationship. This study examines the presence of these variables within the context of the Lebanese Civil War. The results of this demonstrate that each state places greater importance on some variables and ignores others when choosing a proxy. Additionally, this study further demonstrates the presence of new variables that are key to the development of proxy relationships.     

大口径穿甲弹用材料应用研究动态及分析

为了提高穿甲弹的威力,有效对抗新型防护装甲和防护技术,对现有提高大口径穿甲弹穿甲威力的技术途径进行了分析,得出了弹芯材料和弹托材料的力学性能是制约穿甲威力提高的关键因素。详细阐述了目前国内外在大口径穿甲弹用弹芯材料的强韧化、绝热剪切敏感性,新型复合材料弹芯的研究和轻质弹托材料的应用研究动态,并对研究中存在的问题进行了分析。最后,对我国大口径穿甲弹用材料的研究工作进行了展望。     

Enhancing the explosive characteristics of a Semtex explosive by involving admixtures of BCHMX and HMX

A well-known ternary plastic explosive, Czech Semtex 1H, contains a mixture of PETN and RDX softened by SBR. In this work, BCHMX was used to replace PETN in Semtex 1H to form Sem-BC+RDX. In addition, another mixture based on BCHMX and HMX as energetic fillers bonded by the polymeric matrix of Semtex 1H (Sem-BC+HMX) was studied. The particle size distribution of each individual explosive was determined to obtain the optimum mixing conditions. Friction and impact sensitivities were determined. The velocity of detonation was reported practically and the detonation properties were calculated by EXPLO5 code. The explosive strength of each sample was measured by the ballistic mortar test. The conclusion confirms that the velocity of detonation of Sem-BC+HMX was the highest in comparison with the prepared samples. Sem-BC+RDX has the least impact and frictions sensitivities. Sem-BC+RDX has higher detonation velocity, detonation properties and explosive strength than Semtex 1H. Addition of BCHMX in Semtex 1H as a replacement for PETN is the candidate to produce a high performance advanced Czech plastic explosive.     

剖分T型钢轴心压杆的弯扭屈曲

《钢结构设计规范》（GB50017—2003）认为单轴对称的T型钢轴心压杆绕对称轴的稳定性是弯扭失稳问题。本次试验发现，剖分T型钢轴压杆有必要做弯扭屈曲验算，计算方法采用换算长系比法。     

立式金属油罐罐壁与底板连接区域强度分析

采用ABAQUS大型非线性有限元软件,在弹性地基的假设下,对10000m3立式金属油罐进行了水试压状态下的强度分析,计算出两种地基条件下底板的轴向位移和罐壁与底板连接区域的应力分布,所得结果与前人研究成果基本吻合,验证了有限元分析的正确性。从罐壁与底板连接区域的应力曲线可以看出,地基状况对该区域的应力大小有着显著的影响,这为进一步研究复杂边界条件下罐底边缘应力分布以及罐基的优化设计提供了参考。     

磨损身管下的杆式穿甲弹强度失效计算机模拟

针对某型105 mm钨合金超速脱壳穿甲弹在射击试验时出现的弹体强度失效现象,使用有限元分析软件对其强度进行了分析计算。计算分两种工况：正常状态下的弹体应力应变分布和磨损身管条件下的弹体应力应变分布。根据计算结果,证实了弹体强度失效是由于火炮身管过度磨损的原因所致。     

【专栏】飞机结构静强度应变现场测试手段展望

目前飞机结构静强度应变现场主要的测试手段为使用电阻应变计测量系统，但电阻应变计测量系统存在抗电磁干扰差、引线过多以及一致性难以保证等问题，测试效果难以保证。近年来，光纤传感以及非接触光学测量手段的迅速发展，为飞机结构静强度应变现场测试提供了多种选择。本文通过分析以数字图像相关法技术为代表的新技术的特点，如通过进行非接触操作消除安装过程中所带来的分散性误差以及不确定性，在应对某些需要定性分析的飞机静强度试验场合时可以实时给出三维应变和位移场数据，使测量技术更加直观，以及可溯源性更好、更容易保证计量特性的稳定等，对未来飞机结构静强度应变现场测试手段进行了展望，以期为相关部门和机构提供参考。